If Your Roof
Tabs lie flat and granules still cover the mat
Cleaning, securing loose tabs, and a shingle-rated coating extend a roof in decent shape.
Start WithShingle Roof Coating
Commercial Shingle Roofs ยท Owensboro
Owensboro Shingle Roof Coating
We coat commercial shingle roofs in Owensboro that pass a strict inspection: flat tabs, good granules, and a coating the maker approves for shingles.
- Flat, well-granulated shingles only
- Maker terms checked first
- Flashing sealed at walls
- Strip centers, offices, churches
Is This Roof A Fit?
Shingle coating has the narrowest gate of any system we install. These four situations cover most commercial shingle roofs.
If Your Roof
Leaks start at walls, vents, or a chimney
Step flashing and vent boots are the usual source, so those get re-secured and sealed before coating.
Start WithFlashing Repair Plus Coating
If Your Roof
A low metal roof sits behind the shingle front
Both sections can be done in one project, each with its own prep and product.
Start WithShingle And Metal Coating
If Your Roof
Shingles curl, cup, or crack when bent
Brittle tabs stay curled under any coating, so replacing the shingles is the honest call.
Start WithShingle Replacement
What We Check On A Shingle Roof
The inspection decides whether the roof qualifies at all. These five zones carry most of that decision.
Shingle Field
Granule loss shows the black mat underneath. Heavy loss across the field means the shingles are near the end of their life.
Gutters And Splash Areas
Granules collect in gutters and at downspout splash blocks, which tells us how fast the field is wearing.
Rakes And Ridges
Lifted tabs along rakes and ridges catch wind first. Loose ones get sealed down before any coating goes on.
Walls And Chimneys
Step flashing where a slope meets a wall or bell tower lifts with age and lets water run behind the siding.
Attic And Deck Ventilation
A coating changes how shingles shed heat, so intake and exhaust vents are checked along with the deck below.
Commercial Roof Coating Options for Owensboro
Shingle buildings in Owensboro often have more than one roof type. These are the coating setups that fit them.
Shingle-Rated Coating
A product the coating maker approves for asphalt shingles, applied after cleaning and tab repair.
Flashing And Vent Detail
Step flashing re-secured, cracked vent boots replaced, and wall joints sealed with fabric and coating.
Low Metal Section
Rear R-panel roofs on strip centers get screw sealing and a metal system in the same project.
Metal roof coatingSilicone In Box Gutters
Box gutters behind a shingle mansard hold water after rain, so they take a ponding-rated silicone with fabric at each seam.
Silicone roof coatingAcrylic On Flat Sections
Flat or low sections that drain well can take a light acrylic top next to the coated shingles.
Acrylic roof coatingBenefits of Coating Your Roof
When the shingles pass inspection, coating offers these gains over a full tear-off.
| Roof Detail | Coating The Roof | Replacing The Roof |
|---|---|---|
| Shingles Stay In Service | Flat, well-granulated shingles stay on the roof under the coating | Every shingle torn off and hauled away |
| Loose Tabs Held Down | Tabs are sealed before coating and covered by it | New shingles need time to seal in warm weather |
| Sealed Flashing Joints | Step flashing and wall joints get fabric and coating over them | New flashing installed with the new shingles |
| Quieter Work Over Tenants | Cleaning and coating stay on the surface | Tear-off noise and debris over occupied space |
Granules Piling Up In The Gutters?
That is the first sign we look at. Tell us about the roof so we can check whether it qualifies.
What To Have Ready
- Shingle age, if known
- Granules in gutters or splash areas
- Where leaks show inside
- Shingle maker or warranty papers
Our Shingle Roof Coating Steps
The first step decides whether the rest happens. Roofs that fail it get a replacement recommendation instead.
Inspect Your Roof
We test shingle flexibility, measure granule loss, check flashing and valleys, and review the shingle maker's terms on coatings.
Check Code And Permits
OMPC answers permit questions inside its area. Flashing changes, deck repair, and vent work are raised there before scheduling.
Clean Gently
Low-pressure washing removes dirt and algae while keeping granules in place on the shingle surface.
Secure And Seal
Lifted tabs are sealed down, step flashing is re-fastened, and boots, valleys, and wall joints get fabric in base coat.
Apply The Coating
A shingle-rated coating goes on at the listed coverage, worked into the shingle texture with no heavy build at the laps.
Related Roof Services
Shingle buildings often carry one of these roof types on another section.
Metal Roof Coating
Strip centers and churches often add a metal roof over the back of the building.
Best For Rear R-panel sections
Metal roof coating in Owensboro
Acrylic Roof Coating
Acrylic suits flat or low sections next to a coated shingle roof when they drain well.
Best For Low sections that shed water
Acrylic roof coating in OwensboroShingle Roof Coating Questions
Straight answers for owners of commercial shingle roofs in and around Owensboro.
Cost
Is coating shingles cheaper than replacing them?
For a roof that passes inspection, coating skips the tear-off, disposal, and new shingles. Flashing repair, tab sealing, and cleaning are the main prep costs. For a roof with curled or brittle shingles, coating money is wasted, and we say so after the inspection.
What raises the price of a shingle coating job?
Steep pitch, height, and detail. A tall church roof needs more safety setup than a one-story strip center, and chimneys, bell towers, and long wall lines add step flashing work. Valleys and vent boots add fabric and labor too.
Process
Does a shingle coating need a permit?
Ask the permitting office first. Inside its area, OMPC handles building permits for Owensboro and Daviess County outside Whitesville. A surface coating changes little, while deck repair, vent changes, or new flashing are the items most likely to draw review.
Can tenants stay open during the work?
Yes. Cleaning and coating stay on the roof surface, so storefronts and offices below stay open. Entrances under the eaves are kept clear, and the work around rooftop units is timed with the tenants or facility manager.
Coating Choice
Can an asphalt shingle roof on a commercial building be coated?
It can if the shingles lie flat, keep their granules, and the coating maker has approved its product for shingles. Curled, cupped, or brittle shingles stay that way under a coating. Heavy granule loss, the shingle maker's terms, and attic ventilation are checked before any work is planned.
When is replacement the better call?
When shingles crack as they bend, show the black mat across large areas, or have curled tabs over most of the field. At that point a coating only hides the problem for a short time, and new shingles are the better use of the budget.
Get An Owensboro Shingle Roof Coating Estimate
Tell us about the shingles and any leaks. We follow up to inspect the roof and tell you plainly whether it qualifies.