If Your Roof
A pitched steel shop sheds water within minutes of rain
Fast drainage keeps water off the coating, which is what a water-based acrylic needs.
Start WithAcrylic Roof Coating
Water-Based Coating ยท Owensboro, KY
Owensboro Acrylic Roof Coating
We apply acrylic roof coating to sloped commercial metal roofs in Owensboro that shed water fast, on dry, warm days that let each coat cure.
- White or light reflective colors
- Applied on warm, dry days
- Fabric at trim and laps
- Accepts many coatings later
Is This Roof A Fit?
Acrylic suits steel that drains well and gets recoated on a schedule. Where water stands, silicone takes over.
If Your Roof
Dark panels bake the work floor every summer afternoon
A white acrylic top reflects sunlight, and rated colors list their solar reflectance values.
Start WithAcrylic Roof Coating
If Your Roof
Box gutters at the eave hold water after storms
Those gutters get a ponding-rated coating with fabric, and acrylic covers the sloped field above.
Start WithSilicone In The Gutters
If Your Roof
An existing silicone coating covers the panels
Acrylic bonds poorly over silicone, so the roof stays on a silicone recoat path.
Start WithSilicone Recoat
What Acrylic Has To Cover Here
Fast-draining roofs still have joints and details that move. These five get prepped before any acrylic goes down.
Rake And Eave Trim
Trim seams open as the steel moves, and wind-driven rain gets behind them. Each seam takes a fabric-reinforced detail.
Field Laps
Side laps run the length of every panel. Dirt lines along them show where water has been sitting and rust is starting.
Skylight Curbs
Translucent panels are masked or replaced, with the coating stopped at a sealed edge so daylight still comes through.
HVAC Curbs
Loose curb flashing gets re-fastened, and its seams get fabric before the field coat reaches them.
Chalked Surfaces
Old paint and worn coatings chalk in the sun. Washing removes the powder so the new acrylic grips the panel.
Commercial Roof Coating Options for Owensboro
Acrylic comes in more than one build and color. These are the setups we use on Owensboro roofs.
White Reflective Acrylic
Most reflective choice; check the Cool Roof Rating Council listing for the product before picking it.
Tan Or Light Gray Acrylic
Hides rust streaks and road dirt better than bright white on a roof that faces a busy street.
Two-Tone Trim
Ridge caps, rake trim, and gutters kept in a darker shade with a white panel field.
Acrylic Field, Silicone Gutters
Silicone where water sits, acrylic on the slope, each applied at its own listed thickness.
Silicone for ponding spotsAcrylic Over Sealed R-Panel
Screws capped and laps reinforced first, the standard prep for any coated steel roof.
Metal roof coating prepBenefits of Coating Your Roof
On a sloped metal roof in good shape, acrylic delivers these gains over new panels.
| Roof Detail | Coating The Roof | Replacing The Roof |
|---|---|---|
| Cooler Roof Surface | A light acrylic top reflects sun off the steel above the work floor | Depends on the new panel finish |
| Low Odor Inside | Water-based acrylic carries little odor into occupied space | Cutting and fastening noise for weeks |
| Easy Recoats | Accepts many coatings when it is time to recoat | Starts over with a new roof |
| Sealed Trim Seams | Fabric and coating close rake and eave seams | New trim and closures |
Panels Chalky Or Streaked With Rust?
Send a few details about the roof slope and color. Acrylic jobs get planned around a dry-weather window.
What To Have Ready
- Roof slope and panel type
- Color you have in mind
- Gutters that hold water
- Months that suit your operations
Our Acrylic Roof Coating Steps
Acrylic cures by drying, so every step is timed around dew, rain, and temperature.
Inspect Your Roof
We check drainage, trim seams, skylight curbs, rust, and any old coating, and note where water sits too long for acrylic.
Pick The Weather Window
Panel surface temperature, dew point, and the rain forecast set the start. Acrylic needs warm, dry hours to cure before evening damp.
Wash And Prime
Chalk and dirt are washed off, rust is brushed and primed, and stains that could bleed through get a blocking primer.
Reinforce The Details
Fabric goes into base coat at trim seams, end laps, curbs, and pipe boots before the field is coated.
Apply Base And Top
Two coats go on to the listed thickness, the second only after the first has cured, checked with a wet-film gauge.
Related Roof Services
These systems often share a roof with an acrylic coating.
Silicone Roof Coating
Silicone takes the gutters and flat corners that acrylic should not sit in.
Best For Ponding gutters and low laps
Silicone roof coating in Owensboro
Metal Roof Coating
Every acrylic job on steel starts with the same fastener and rust prep.
Best For Exposed-fastener R-panel
Metal roof coating in OwensboroAcrylic Roof Coating Questions
Answers for owners weighing acrylic for a sloped metal roof in Owensboro.
Cost
Is acrylic the lower-cost coating?
The material usually costs less than silicone, and prep is the same under both. Where a roof has a few ponding gutters, putting silicone only there and acrylic on the field keeps the material cost down without leaving water on acrylic.
Does color change the price?
Rarely by much. White, tan, and light gray acrylics are priced close together. Two-tone work with darker trim adds masking and a second product, so it adds labor along the ridge caps, rakes, and gutters.
Process
What weather does an acrylic coating need?
Dry steel above the dew point and within the temperature range on the data sheet. Crews start after morning dew burns off, stop early enough that the coat skins over before evening damp, skip days with rain forecast, and avoid gusty days that carry overspray. Panel surface temperature matters more than the air reading.
Which details get extra work on gutters, skylights, and curbs?
All three take the field coating plus reinforcement. Built-in gutters are cleaned to bare metal, primed, and given a ponding-rated coat with fabric at each seam. Skylight panels are masked or replaced with a sealed edge, loose curb flashing is re-fastened, and cracked pipe boots are replaced.
Coating Choice
Should the whole metal roof get the same coating color?
White across the roof gives the most reflectance, though some owners pick tan or light gray to match the building or hide dirt. Darker trim with a white field works too. Owensboro summers are hot and humid, which favors a lighter color on most commercial roofs.
How does a cool roof color hold up over time?
Dirt lowers reflectance, so the aged rating is the better number to compare. Acrylic picks up less dirt than silicone, and a gentle wash during upkeep brings back some of the shine. Cool roof directory listings show both initial and aged values by product.
Get An Owensboro Acrylic Roof Coating Estimate
Tell us about the slope, the color you want, and any spots that hold water. We follow up to inspect the roof in person.